Crosslinking Agents
C.A.S.E.Adhesives are expected to withstand many stresses and strains in numerous applications. Crosslinking the polymer not only increases the overall strength of the adhesive, but can be especially useful in increasing the cohesive strength of the finished product.
Crosslinking Agent
ZINC OXIDE DISPERSION is a 60% active in water crosslinking agent for all carboxylated polymers and Neoprene latex. It is also an activator for sulfur cured latex polymers.
Accelerator
VANAX 829 Powder is a high performance thiadiazole used to crosslink chlorinated polyethylene (CPE), which possesses good heat and solvent resistance suitable for many hose, tube, and duct applications, as well as the abrasion and environmental resistance required by Wire & Cable jacketing.
Crosslinking Agent
A blocked diamine crosslinking agent used in fluoroelastomers (FKM), polyacrylic (ACM), ethylene-acrylic (AEM), and epichlorohydrin (ECO) elastomers. FDA Compliant.
Crosslinking Agent
A phosphonium salt used in fluoroelastomers (FKM) and polyacrylic polymers (ACM).
Crosslinking Agent
A blocked diamine crosslinking agent used for very safe processing of fluoroelastomers (FKM), polyacrylic (ACM), ethylene-acrylic (AEM), and epichlorohydrin (CO-ECO) elastomers.
Crosslinking Agent
An alicyclic amine salt used as a curing agent mainly for fluorelastomers (FKM). For its safety in processing, it can be positioned between VANLINK 1 and VANLINK 3. FDA Compliant.
Crosslinking Agent
A coagent for peroxide curing of many elastomer types (EPDM, FKM, CPE, etc). It improves heat resistance, physical properties and compression set. Yellow liquid at 30°C and white solid at 25°C.
Crosslinking Agent
A coagent for peroxide curing of many elastomer types (EPDM, FKM, CPE, etc). VANLINK 7-50 is a 50% active powder version of VANLINK 7.
Crosslinking Agent
A coagent for peroxide curing of many elastomer types (EPDM, FKM, CPE, etc). VANLINK 7-70 is a 70% active powder version of VANLINK 7.
Crosslinking Agent
A cationic surfactant used as an accelerator for ACM & AEM and as an additional accelerator for FKM. Also used as an adhesion promoter in several elastomers and a performance improver for some TPEs.